基于气动-弹道一体化模型的飞行器外形优化设计

为提升飞行器气动外形优化设计效果,研究了新型飞行器在大空域、宽速域范围的气动适应性问题,提出一种基于气动-弹道一体化模型的外形优化设计方法。通过考虑气动和弹道的耦合作用,综合利用类型函数/形状函数转换技术、气动工程估算方法和Radau伪谱法,建立飞行器气动-弹道一体化模型。基于该模型,通过明确优化目标和约束条件,给出基于Kriging的气动外形优化方法,实现在多参数约束条件下的飞行器气动外形高效全局优化。以升力体构型飞行器为例,开展气动外形优化设计,结果表明该方法能较好地描述大空域、宽速域的气动和弹道特征,有效提升飞行器气动外形设计精度和水平,可为新型飞行器总体设计提供技术支撑。     

Equity in genetic newborn screening

State‐level newborn screening allows for early treatment of genetic disorders, which can substantially improve health outcomes for newborns. As the cost of genetic testing decreases, it is becoming an essential part of newborn screening. A genetic disorder can be caused by many mutation variants; therefore, an important decision is to determine which variants to search for (ie, the panel design), under a testing budget. The frequency of variants that cause a disorder and the incidence of the disorder vary by racial/ethnic group. Consequently, it is important to consider equity issues in panel design, so as to reduce disparities among different groups. We study the panel design problem using cystic fibrosis (CF) as a model disorder, considering the trade‐offs between equity and accuracy, under a limited budget. Most states use a genetic test in their CF screening protocol, but panel designs vary, and, due to cost, no state's panel includes all CF‐causing variants. We develop models that design equitable genetic testing panels, and compare them with panels that maximize sensitivity in the general population. Our case study, based on realistic CF data, highlights the value of equitable panels and provides important insight for newborn screening practices.     

高空气球外形计算及通用算法设计

高空气球为临近空间中的研究提供了可靠的低成本平台。目前高空气球球形一般直接采用"自然形"或以"自然形"为基础,但通用、简捷地求解"自然形"外形方程一直是个难点。将"自然形"气球外形求解问题转化为最优控制问题,利用最优控制领域成熟的求解工具——高斯伪谱法最优化软件包计算气球外形。此外,通过分析外形数据得到外形变化规律,设计通用算法求解任意球形控制因子、任意高度的"自然形"气球外形。结果显示,该算法无须调参便可计算所需的"自然形"球形,便于科研人员快速获得大量所需     

重力势能锁止型外骨骼设计及其效能评价

现存的被动式外骨骼存在助力效果不明显等缺陷。基于人体步态特征,提出了将人体行走过程中的重力势能转化为人体抬腿过程中动能的原理,通过弹簧、曲柄滑块机构、棘轮棘爪机构以及链传动机构的组合,设计了一款被动式下肢机械外骨骼,并通过外骨骼动力学分析和生理消耗指数实验测试的方法进行了外骨骼性能评价。动力学分析结果表明,穿戴外骨骼后髋关节峰力矩总量降低了23.43%,髋关节做功总量降低了30.59%,初步验证了外骨骼的有效性。生理消耗指数实验测试结果表明, 穿戴外骨骼对于短距离动作转换未产生显著效果,但在长距离行走和上坡行走中分别降低了8.1%和10.4%的能量消耗。因此,该下肢外骨骼助力性能得到了验证,为相关领域的研究提供了实例化参考。     

Prediction of three-dimensional elastic behavior of filament-wound composites based on the bridging model

This work provides a method to predict the three-dimensional equivalent elastic properties of the filament-wound composites based on the multi-scale homogenization principle.In the meso-scale,a representative volume element(RVE)is defined and the bridging model is adopted to establish a theoretical predictive model for its three-dimensional equivalent elastic constants.The results obtained through this method for the previous experimental model are compared with the ones gained respec-tively by experiments and classical laminate theory to verify the reliability of this model.In addition,the effects of some winding parameters,such as winding angle,on the equivalent elastic behavior of the filament-wound composites are analyzed.The rules gained can provide a theoretical reference for the optimum design of filament-wound composites.     

Multi-objectives nonlinear structure optimization for actuator in trajectory correction fuze subject to high impact loadings

This paper presents an actuator used for the trajectory correction fuze, which is subject to high impact loadings during launch. A simulation method is carried out to obtain the peak-peak stress value of each component, from which the ball bearings are possible failures according to the results. Subsequently, three schemes against impact loadings, full-element deep groove ball bearing and integrated raceway, needle roller thrust bearing assembly, and gaskets are utilized for redesigning the actuator to effectively reduce the bearings' stress. However, multi-objectives optimization still needs to be conducted for the gaskets to decrease the stress value further to the yield stress. Four gasket's structure parameters and three bearings' peak-peak stress are served as the four optimization variables and three objectives, respectively. Optimized Latin hypercube design is used for generating sample points, and Kriging model selected according to estimation result can establish the relationship between the variables and objec-tives, representing the simulation which is time-consuming. Accordingly, two optimization algorithms work out the Pareto solutions, from which the best solutions are selected, and verified by the simulation to determine the gaskets optimized structure parameters. It can be concluded that the simulation and optimization method based on these components is effective and efficient.     

注意力机制量化剪枝优化方法

面向基于注意力机制模型的巨大计算和访存开销问题,研究量化和剪枝协同优化的模型压缩技术,提出针对注意力机制中查询、键、值、概率共四个激活值矩阵的对称线性定点量化方法。同时,提出概率矩阵剪枝方法和渐进式剪枝策略,有效降低剪枝精度损失。在不同数据集上的实验结果表明,针对典型基于注意力机制模型BERT,在较低或者没有精度损失的情况下该优化方法可达到4位或8位定点量化、0.93～0.98的稀疏度,大幅度降低模型计算量,为加速量化稀疏模型的推理奠定良好的基础。     

C4ISR系统体系结构设计集成环境

C4ISR系统体系结构设计是系统综合集成的基础.针对C4ISR体系结构框架2.0,分析了体系结构产品的特点,研究了体系结构产品设计工具的分类以及应该具有的功能,提出体系结构产品设计工具的集成框架和基于体系结构核心数据库的数据管理机制,并实现了体系结构产品设计工具以及体系结构设计集成环境.     

雷达虚拟维修训练中交互系统的通用性

基于USB接口技术对"通用雷达装备虚拟维修训练系统(URVMTS)"的人机交互系统进行研究,通过合理的软、硬件设计实现了系统的通用性。不同的实装操作部件经过适当的信号调理均可以通过该系统方便地实现与雷达虚拟样机之间的交互。着重介绍了交互系统的通用性设计与实现方法,包括系统的通用性设计方案,USB硬件电路的通用性设计及相应的软件开发。     

ARCS动机模型在初中英语语法教学中的应用

语法学习能在一定程度上保证语言的地道性、流畅性和实用性。但就目前来看,英语学习者学习语法的积极性普遍不高,不少英语学习者抱怨英语语法项目琐碎繁杂、语法学习枯燥无聊。针对此现状,本文尝试将ARCS模型的四类动机策略整合于初中英语语法教学,以期有效激发并维持学习者的语法学习热情,提高语法教学效果。